Passivated 416 Stainless Steel Dowel Pin, 3/32" Diameter, 1/2" Length (Pack of 10)

Passivated 416 Stainless Steel Dowel Pin, 3/32" Diameter, 1/2" Length (Pack of 10) Reviews

Other Picture

Dowel pins are simple headless cylinders that are commonly used as joining and locating devices, pivots, hinges, shafts, jigs, and fixtures in machine tool fabrication. Type 416 Stainless Steel is stronger than both Type 316 and 18-8 stainless steel, and magnetic. Meet Mil. Spec. 16555 wherever a dash number is shown. Minimum Rockwell hardness is C36.

Visit Store Now !!

Detail Products

• 416 Stainless Steel Dowel Pin, 1/8" Diameter, 1" Length (Pack of 10)
• 303 Stainless Steel Undersized Dowel Pin, 1/4" Diameter, 1/2" Length (Pack of 5)
• Nylon 6/6 Shoulder Washer, 0.098" ID, 0.150" OD, 0.031" Thick, 0.240" Shoulder Diameter, 0.062" Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, 5/16"-18, 1-1/2" Length (Pack of 25)
• Brass Machine Screw, Round Head, Slotted Drive, #5-40, 1/2" Length (Pack of 100)

Detail Reviews

Acetal Dowel Pin, 5/16" Diameter, 3/4" Length (Pack of 100)

Acetal Dowel Pin, 5/16" Diameter, 3/4" Length (Pack of 100) Reviews

Other Picture

Acetal Dowel Pin, 5/16" Diameter, 3/4" Length (Pack of 100) Feature

• Smooth finish and flat ends
• Nonmarring plastic with low moisture absorption

Acetal Dowel pins have a smooth finish and flat ends, these plastic pins are nonmarring and have low moisture absorption. Dia. tolerance is + or -0.005. Pins are resistant to gas, oil, and other neutral chemicals. Max. temperature is 220 Degreess F. Rockwell hardness is M80. Dowel pins are simple headless cylinders that are commonly used as joining and locating devices, pivots, hinges, shafts, jigs, and fixtures in machine tool fabrication.

Visit Store Now !!

Detail Products

• Nylon 6/6 Shoulder Washer, 0.318" ID, 0.374" OD, 0.187" Thick, 0.502" Shoulder Diameter, 0.44" Length (Pack of 100)
• -012 EPDM O-Ring, 70A Durometer, Black, 3/8" ID, 1/2" OD, 1/16" Width (Pack of 100)
• Nylon 6/6 Machine Screw, Oval Head, Slotted Drive, M2.5-0.45, 20mm Length (Pack of 100)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 1" Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #6-32, 1/4" Length (Pack of 100)

Detail Reviews

1/8 Dia., 1/2 Lg., Brighton Best Dowel Pins (100 Per Box)

1/8 Dia., 1/2 Lg., Brighton Best Dowel Pins (100 Per Box) Reviews

Other Picture

All diameters are +.0002. Rust resistant.

Visit Store Now !!

Detail Products

Detail Reviews

316 Stainless Steel Dowel Pin, 3/32" Diameter, 3/4" Length (Pack of 100)

316 Stainless Steel Dowel Pin, 3/32" Diameter, 3/4" Length (Pack of 100) Reviews

Other Picture

316 Stainless Steel Dowel Pin, 3/32" Diameter, 3/4" Length (Pack of 100) Feature

• Commonly used to retain parts in a fixed position or to preserve alignment
• Chamfered at both ends for easy insertion
• Type 316 Stainless Steel are the most corrosion resistant
• May be mildly magnetic

Dowel Pins also referred to as Parallel Pins, are commonly used to retain parts in a fixed position or to preserve alignment. Accurately ground to plus 0.0002, minus 0.0000 of the stated diameter and + or -0.010 of the length, they are chamfered at both ends for easy insertion. A selection of sizes and lengths is a useful addition to the well-equipped shop or laboratory. Type 316 Stainless Steel are the most corrosion resistant dowel pins. May be mildly magnetic.

Visit Store Now !!

Detail Products

• 416 Stainless Steel Dowel Pin, 1/8" Diameter, 1" Length (Pack of 10)
• 18-8 Stainless Steel Dowel Pin, 1/8" Diameter, 3/4" Length (Pack of 100)
• 303 Stainless Steel Undersized Dowel Pin, 3/16" Diameter, 5/16" Length (Pack of 10)
• Passivated 416 Stainless Steel Dowel Pin, 3/32" Diameter, 3/4" Length (Pack of 10)
• General Tools 888 1/4-Inch to 1/2-Inch Dowel Center Transfer Plugs

Detail Reviews

3/8 Dia., 3. Lg., Holo-Krome Dowel Pins (40 Per Box)

3/8 Dia., 3. Lg., Holo-Krome Dowel Pins (40 Per Box) Reviews

Other Picture

All diameters are +.0002. Rust resistant.

Visit Store Now !!

Detail Products

Detail Reviews

316 Stainless Steel Dowel Pin, 1/16" Diameter, 3/4" Length (Pack of 25)

316 Stainless Steel Dowel Pin, 1/16" Diameter, 3/4" Length (Pack of 25) Reviews

Other Picture

316 Stainless Steel Dowel Pin, 1/16" Diameter, 3/4" Length (Pack of 25) Feature

• Commonly used to retain parts in a fixed position or to preserve alignment
• Chamfered at both ends for easy insertion
• Type 316 Stainless Steel are the most corrosion resistant
• May be mildly magnetic

Dowel Pins also referred to as Parallel Pins, are commonly used to retain parts in a fixed position or to preserve alignment. Accurately ground to plus 0.0002, minus 0.0000 of the stated diameter and + or -0.010 of the length, they are chamfered at both ends for easy insertion. A selection of sizes and lengths is a useful addition to the well-equipped shop or laboratory. Type 316 Stainless Steel are the most corrosion resistant dowel pins. May be mildly magnetic.

Visit Store Now !!

Detail Products

• 416 Stainless Steel Dowel Pin, 1/2" Diameter, 3" Length (Pack of 5)
• 18-8 Stainless Steel Dowel Pin, 1/8" Diameter, 3/4" Length (Pack of 100)
• 303 Stainless Steel Undersized Dowel Pin, 1/8" Diameter, 7/16" Length (Pack of 10)
• Passivated 416 Stainless Steel Dowel Pin, 3/32" Diameter, 3/4" Length (Pack of 10)
• General Tools 888 1/4-Inch to 1/2-Inch Dowel Center Transfer Plugs

Detail Reviews

3/4 X 3 Dowel Pins / Black Oxide / 10 Pc. Carton

3/4 X 3 Dowel Pins / Black Oxide / 10 Pc. Carton Reviews

Other Picture

3/4 X 3 Dowel Pins / Black Oxide / 10 Pc. Carton Feature

• Pins
• 3/4 X 3 Dowel Pins
• Black Oxide

3/4 X 3 Dowel Pins / Black Oxide

Visit Store Now !!

Detail Products

Detail Reviews

Acetal Dowel Pin, 1/8" Diameter, 3/8" Length (Pack of 100)

Acetal Dowel Pin, 1/8" Diameter, 3/8" Length (Pack of 100) Reviews

Other Picture

Acetal Dowel Pin, 1/8" Diameter, 3/8" Length (Pack of 100) Feature

• Smooth finish and flat ends
• Nonmarring plastic with low moisture absorption

Acetal Dowel pins have a smooth finish and flat ends, these plastic pins are nonmarring and have low moisture absorption. Dia. tolerance is + or -0.005. Pins are resistant to gas, oil, and other neutral chemicals. Max. temperature is 220 Degreess F. Rockwell hardness is M80. Dowel pins are simple headless cylinders that are commonly used as joining and locating devices, pivots, hinges, shafts, jigs, and fixtures in machine tool fabrication.

Visit Store Now !!

Detail Products

• Nylon 6/6 Shoulder Washer, 0.194" ID, 0.248" OD, 0.062" Thick, 0.441" Shoulder Diameter, 0.108" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Oval Head, Slotted Drive, M6-1, 12mm Length (Pack of 100)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #10-32, 2" Length (Pack of 100)
• -012 EPDM O-Ring, 70A Durometer, Black, 3/8" ID, 1/2" OD, 1/16" Width (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #6-32, 1/4" Length (Pack of 100)

Detail Reviews

Alloy Steel Spiral Vented Pull-Out Dowel Pin, 1/2" Diameter, 3-1/2" Length (Pack of 1)

Alloy Steel Spiral Vented Pull-Out Dowel Pin, 1/2" Diameter, 3-1/2" Length (Pack of 1) Reviews

Other Picture

Alloy Steel Spiral Vented Pull-Out Dowel Pin, 1/2" Diameter, 3-1/2" Length (Pack of 1) Feature

• Length tolerance: +/- 0.010"
• Core hardness: 47-58 Rockwell C
• Diameter tolerance: +/- 0.0001"
• Surface hardness: 60-64 Rockwell C
• Meets specification ASME B18.8.2

Internally threaded hole allows removal of pull dowels with a standard screw. Typically used in blind hole applications. Dowels feature a groove cut to allow trapped air to be released. Constructed of heat treated alloy steel for long tool life.

Visit Store Now !!

Detail Products

Detail Reviews

5/16X1 1/4 Dowel Pin (25 count)

5/16X1 1/4 Dowel Pin (25 count) Reviews

Other Picture

5/16X1 1/4 Dowel Pin

Visit Store Now !!

Detail Products

Detail Reviews

3/16 X 7/8 Dowel Pins / Bright Finish / 100 Pc. Carton

3/16 X 7/8 Dowel Pins / Bright Finish / 100 Pc. Carton Reviews

Other Picture

3/16 X 7/8 Dowel Pins / Bright Finish / 100 Pc. Carton Feature

• Pins
• 3/16 X 7/8 Dowel Pins
• Bright Finish

3/16 X 7/8 Dowel Pins / Bright Finish

Visit Store Now !!

Detail Products

Detail Reviews

Alloy Steel Flat Vented Pull-Out Dowel Pin, 1" Diameter, 2-1/2" Length (Pack of 1)

Alloy Steel Flat Vented Pull-Out Dowel Pin, 1" Diameter, 2-1/2" Length (Pack of 1) Reviews

Other Picture

Alloy Steel Flat Vented Pull-Out Dowel Pin, 1" Diameter, 2-1/2" Length (Pack of 1) Feature

• Length tolerance: +/- 0.010"
• Core hardness: 47-58 Rockwell C
• Diameter tolerance: +/- 0.0001"
• Surface hardness: 60-64 Rockwell C
• Meets specification ASME B18.8.2

Internally threaded hole allows removal of pull dowels with a standard screw. Typically used in blind hole applications. Dowels feature a groove cut to allow trapped air to be released. Constructed of heat treated alloy steel for long tool life.

Visit Store Now !!

Detail Products

Detail Reviews

18-8 Stainless Steel Dowel Pin, 1/8" Diameter, 1" Length (Pack of 100)

18-8 Stainless Steel Dowel Pin, 1/8" Diameter, 1" Length (Pack of 100) Reviews

Other Picture

18-8 Stainless Steel Dowel Pin, 1/8" Diameter, 1" Length (Pack of 100) Feature

• Commonly used to retain parts in a fixed position or to preserve alignment
• Chamfered at both ends for easy insertion

Dowel Pins also referred to as Parallel Pins, are commonly used to retain parts in a fixed position or to preserve alignment. Accurately ground to plus 0.0002, minus 0.0000 of the stated diameter and + or -0.010 of the length, they are chamfered at both ends for easy insertion. A selection of sizes and lengths is a useful addition to the well-equipped shop or laboratory.

Visit Store Now !!

Detail Products

• 416 Stainless Steel Dowel Pin, 1/8" Diameter, 1" Length (Pack of 10)
• Passivated 416 Stainless Steel Dowel Pin, 3/16" Diameter, 1" Length (Pack of 10)
• 303 Stainless Steel Undersized Dowel Pin, 1/8" Diameter, 7/16" Length (Pack of 10)
• Stainless Steel Socket Cap Screw, Hex Socket Drive, 3/8"-16, 1/2" Length (Pack of 25)
• Nylon 6/6 Shoulder Washer, 0.128" ID, 0.187" OD, 0.046" Thick, 0.312" Shoulder Diameter, 0.139" Length (Pack of 100)

Detail Reviews